Recently Browsing 0 members
No registered users viewing this page.
Help! I started my first dollhouse and FINALLY got to a finishing point after about a year and a half. There are still a few minor things that need done but it’s finished enough for now (I needed to finish it by Xmas for my daughter). I have made dozens of little 1:24 models in the past and am a little knowledgable in electrical (aircraft electrician over a decade ago) but have since become rusty in the topic. I opted to install 6, small LED lights into the dollhouse, connected by a series of 9v batteries. Since my other smaller models have included similar setups with the LEDs and batteries, I didn’t think this would be an impossible task. I have ordered 9V lights and hardwired them into the house, connecting them in series to 6, 9v battery housing and a switch. It had seemed a bit of overkill to me, since the smaller models often used a single AA battery for often up to 4-5 bright lights. Except, it was very dim (which I don’t mind too much, as it’s more for effect anyway) and lasted maybe 30 minutes before dying. I’m lost now on what to do. I would have to completely cut into the house and moulding to replace the wiring. Thoughts? Did I completely mess this up? Help!! I will try to post pictures of the setup.
I am brand new to this community and it looks like a really fun place to get involved! I have done some dollhouse work here and there in the past, but I am now undertaking a BIG project. My daughter-in-law gave me her old Harrison dollhouse several years ago because she no longer wanted it and knew I enjoyed working on things like that. It was overwhelming and just sat in my basement. BUT, she and my son had a little girl 2 years ago, and I would now like to fix it up for my one and only grandchild!
My biggest problem is that it is VERY rickety and feels as if it could fall apart quite easily. I am going to mount it to a base and add casters. But I don't know how to go about making the rest of it more sturdy. It would likely be easier to purchase a new one and start all over again, but I think there will be some great sentimental value if I use this one. My son and his wife are very big into that sort of thing!
IF I can take it apart and start again, would that be the best way to go? (Not sure if that's possible.) And of course, I also wonder if things will just break if I do attempt to take it apart! As of now, there are no broken walls, etc. The only missing piece is one window and a small piece of trim on the outside. I have written Greenleaf to ask if they have a window I can purchase. If not, I have no clue how to find that!
Perhaps there is some way to add some wood in some way to provide a better structure or make it more sturdy? If so, please let me know, because I am clueless!
I have tons of decorating ideas and that part will be easy for me. But I was a little stunned at the cost of furniture. So any advice (beside 2nd hand stores - as I've tried them regularly) for finding cheap furniture or furniture kits - or places where I can make furniture - but somewhat decent stuff (not a paper couch) - would be greatly appreciated! I actually would like to make the furniture, but I want it to look really pretty without being overly complicated to make. I am good with crafts, but haven't done much work with wood! Ha!
Thank you in advance for any help you can give me. I appreciate it more than you can know!!!!
Hi everyone! I've had a long quiet period on here, but I've been steadily working away and going to shows/shops (I was at Good Sam in San Jose and was fortunate to visit Dollhouses, Trains, and More in Novato, CA for their closing sale). I will, finally, post a batch of haul and progress photos in the first week of November, when I get settled back into my home in Eugene. I really am terrible with a camera and it bugs everyone I know! In the meantime, I have a question:
Has anyone ever tried adding siding after their build's exterior was complete? Still being a novice, when I finished my first build (the Orchid; the interior is still a work-in-progress) I stepped back and thought 'I think I should have done siding.' Especially with the shingles on, the level of detail on the exterior just varies too much; it's been irritating me for a couple of months now. I'm a bit of a stickler it seems (though I didn't know it at the time)! My window/door casings, dormers, gingerbread, and my custom porch/railings are all already in place. I realize it may be very difficult, but the question is: is it even possible? If so, do you have any tips on how to do this?
Any and all possible mini wisdom is welcome!
P.S. I have the opportunity to snag a very affordable Laurel kit secondhand so I'm trying to decide where I should just start the next building with siding and call it 'lesson learned' or go back and add to the Orchid (and stash the Laurel until after the New Year, space is a very important consideration here). P.S. P.S.: I'm not a Cher fan, but I took a page out of Elizabeth's book (Studio E miniatures) since I'm always charmed by her ability to make musical jokes in her posts/titles!
Oh my goodness, I so happy I found this forum. Super excited to get to know all these creative minds. I have zero experience building dollhouses - well as an art student 100 years ago in HS, I did create a miniature Shakespearian Scene for my English teacher. That’s it!
My husband purchase this dollhouse for my at a Fleamarket. I’m planning on rehabbing it ;-)
I finally got it! I'm building my first house, the Orchid. I literally sat and stressed for hours yesterday about the stairs, which were horrible and splintery and way too big really for the housel. So I found angieaug's video on youtube and the lightbulb went on. I cobbled together a set this morning that fits like I want and she made it easy as pie. Eating pie that is, lol. So thanks to her! They are drying but I need to figure out wallpaper and stuff before I put them in permanently.