Recently Browsing 0 members
No registered users viewing this page.
I have made working miniature power tools like Power drill, angle grinder, circular saw, air blower...and more with the name of "SAZOH miniature power tools"
Here are the video links of my working power drill model (Please subscribe my youtube channel for more videos)
I’m a newbie when it comes to finishing miniature furniture. I have a lovely unfinished chair that has some carved detail and I’d like to repaint it gold, bronze, or dark brown and reupholster it. Can anyone recommend a brand and color of gold paint? In general, what are your favorite paint types and brands to use when painting miniature furniture? Do you prime the wood before painting? If so, what do you use.
Thanks in advance for your help!
By enchanted 1970's house
Hello everyone! I'm new at this stuff, but I've been reading this forum for months and I've learned so much from you all. Finally realized I should register. I'm hoping you can advise me on one issue...
I'm attempting to renovate a large 1970's dollhouse that originally had no siding. Very carefully I glued on clapboard siding (the kind that comes in overlapping wooden sheets) using Beacon Quik-Grip. After letting each side dry overnight, weighted down and taped, I began to paint it with Kilz primer and regular latex house paint. And then... horrors! The siding began to warp a bit and came up in a few spots! The water-based paint must have overwhelmed the sticking power of the glue.
But even so, the warping was minor enough that I thought I could just get away with squeezing more glue under the lifted edges and weighting them down. It was still not quite as even as it had been before painting, but it seemed... okay.
But THEN... we went away from the house for a couple of hot summer months, and when we came back I saw that the humidity had done a number on the siding. MORE warping! I ended up scraping off one entire side of it.
Do you have any advice to keep this from happening again? Is there another kind of paint I could use that might impart less moisture to the wood?