BeaconHill-wallpanels-wip.jpg
Here are the assembled wall pannels, after the stain is applied they'll have to lay down flat with weight on top for about 2-3 days until completly dry. I'm including this shot in case anyone is interested in trying something like this, I didn't use a lot of materials as you can see but they still look pretty realistic after put together. It's all basswood so they'll get a stain treatment, you can see a test sample for the color I used on a small piece of wood. Also included the stains I use, the bottle is the premixed stain (water based) and in the jar a mix with satin varnish finish. I apply them with a paintbrush and let it dry for over a day so the color will be evenly spread after absorbed by the wood, then another day or 2 to let the top varnish dry. I use the same method for the stairs, windows, doors etc.
- 6
Photo Information
- Taken with Apple iPhone 6s
- Focal Length 4.2 mm
- Exposure Time 1/33
- f Aperture f/2.2
- ISO Speed 80
Recommended Comments
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.