spa2.jpg
This shows sort of what the spa is going to look like. Everything is just sitting there for show. There will be water in the pool eventually. I will need to tint the clear plastic vacuformed water, and the top pile of the corner rocks will be above water, and the bottom half below it. It is supposed to be tinted with white, but I will probably tint it with a blue-green color. I will probably try either Future floor wax and food coloring, or alcohol inks to tint it. Hopefully one of those will will work.
You can just see the little brass faucets in the flat rocks on the wall. I expect those are to rinse with before you get into the spa. You can also barely see two of the very tiny buckets sitting on the floor. Those were a pain to do, since you have to wind pieces of copper wire around the tops and bottoms of them, and twist the wire at the end. I had no idea these were going to be so unbelievably tiny!!!
Photo Information
- Taken with SAMSUNG SM-N900T
- Focal Length 4.1 mm
- Exposure Time 1/40
- f Aperture f/2.2
- ISO Speed 50
Recommended Comments
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.