Jump to content
  • entries
    6
  • comments
    10
  • views
    252

About this blog

The Ginkgo House is my first official dollhouse. My background includes building architectural models for designers and architects, but I have never furnished or 'peopled' one.  The Ginkgo House project started out as an architectural model for my own some-day home, and was supposed to be 'Tiny Home'. Somehow it just does not want to be tiny. Small, yes. But not tiny.

The first mock-up was done in free cardbard and wood crates found behind the supermarkets. Masking tape and pins were the onlu out-of-pocket. 

Entries in this blog

Moving doors

So, I saw a bench I just had to make a 1:12 copy of, but it would be too long for the place I wanted to put it, and would overlap existing door frames on either side. I could either remake the bench a little smaller - or - move one of the doors. That would be the easier route. I broke out the mini sledge hammer and took down about an inch of wall and the (bath) door with it. I then moved the inch of wall to the opposite side of the door frame, spackled it all back together, and it all fit nicely

Kami

Kami in Demolitions

×
×
  • Create New...