Jump to content
  • entries
    6
  • comments
    10
  • views
    248

About this blog

The Ginkgo House is my first official dollhouse. My background includes building architectural models for designers and architects, but I have never furnished or 'peopled' one.  The Ginkgo House project started out as an architectural model for my own some-day home, and was supposed to be 'Tiny Home'. Somehow it just does not want to be tiny. Small, yes. But not tiny.

The first mock-up was done in free cardbard and wood crates found behind the supermarkets. Masking tape and pins were the onlu out-of-pocket. 

Entries in this blog

General

Total Tile Fail

I found some 10X10 self adhesive tiles I liked, then cut a few up into 2X2 inch squares to repressent 2ftX2ft tiles. Cutting them was enough work, but trying to install them was aggravating at best. The tiles would pop up or drift, so I was constantly re-setting them, and had a pin a few down. In the end it just didn't look nice. So, in the morning I'll rip out half a days work.  But, I have a new plan. As these are parquet tiles, I will cut them into 5X5 squares and then align the wood grain to
Kami

Kami in General

4
×
×
  • Create New...