Toffee Posted December 16, 2020 Share Posted December 16, 2020 Not sure if anyone can help with this request, I found a San Francisco kit but the tower roof is missing, does anyone have the triangular panel sizes so I can recreate them? Many thanks. Quote Link to comment Share on other sites More sharing options...
Cati Posted December 16, 2020 Share Posted December 16, 2020 HI Carmel and welcome to the forum. Someone with lots of Dura-Craft experience might chime in to help 1 Quote Link to comment Share on other sites More sharing options...
havanaholly Posted December 16, 2020 Share Posted December 16, 2020 I can't. The SF555 was my very first kit build, which I gave to the first granddaughter when she was 12 and the next timeI saw her some cousins had begun destruction on it. That build was nearly 40 years ago. Quote Link to comment Share on other sites More sharing options...
genieDOLL Posted December 16, 2020 Share Posted December 16, 2020 I will measure them, could make you a template and email the scanned copy? Mine is covered in shingles but could give you an estimate if it would help Quote Link to comment Share on other sites More sharing options...
jbnmini Posted December 16, 2020 Share Posted December 16, 2020 Don't know if all three of the versions have the exact same size tower roof, but I may have one that I could template and scan/email to you. Quote Link to comment Share on other sites More sharing options...
genieDOLL Posted December 18, 2020 Share Posted December 18, 2020 On 12/16/2020 at 12:20 PM, genieDOLL said: I will measure them, could make you a template and email the scanned copy? Mine is covered in shingles but could give you an estimate if it would help The BOTTOM measurement width = 5". The length of slope from the top to the bottom 5" = 9". I hope this helps? Quote Link to comment Share on other sites More sharing options...
genieDOLL Posted December 18, 2020 Share Posted December 18, 2020 My photo went right through the text. Each triangle is 5" width at bottom, and the slope of each is 9" from the top to the bottom. I have the San Fran 555. Quote Link to comment Share on other sites More sharing options...
Ethannah1902 Posted January 27, 2021 Share Posted January 27, 2021 (edited) Edited January 27, 2021 by Ethannah1902 What model sf is this. 555 ? Quote Link to comment Share on other sites More sharing options...
Ethannah1902 Posted January 27, 2021 Share Posted January 27, 2021 What model SF is this ? Sf 555 Quote Link to comment Share on other sites More sharing options...
havanaholly Posted January 27, 2021 Share Posted January 27, 2021 (edited) If the exterior walls are built up with tongue & groove sections and milled-in siding it's probably the SF555; if it's MDF (and HEAVY!) it's the SF557. Edited February 1, 2021 by havanaholly Quote Link to comment Share on other sites More sharing options...
Ethannah1902 Posted February 1, 2021 Share Posted February 1, 2021 Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.