Recently Browsing 0 members
No registered users viewing this page.
I need a little help with the Orchid's double hung windows and staining/paint the surrounding walls. Sorry if a simliar question has been asked before, but I could not find an previous blog post.
For part B of assembly, the directions say that the "portion of the wood surrounding the window opening, both interior and exterior, should be finsihed as the sashes have been (i.e. paint or stain) before gluing the sashes in place."
(I stained my window sashes a dark brown, but I plan to paint the exterior a light blue. For the interior I want to do stucco.)
So my question: how do I measure how much I should stain around the window on the house's walls? When I look at pictures of finished Orchids online it's not obvious to me that everyone has followed this direction. Is it really that important?
I have recently acquired a amazingly beautiful doll house for FREE, hard to believe, but it's true. There are a few cosmetic issues on the exterior that need replaced and/or fixed: The entire porch railing. Most of the clear plastic window backings are missing. Doors need it be replaced. Trim work needs to be replaced, and from what I can tell, a balcony/walkway of some sort existed above thw3rd floor window and wrapped around both sides of the house. I want to restore & repair it to prime condition & do it correctly.
I was never lucky enough as a child to have one of my own. So this is a very special project for me to say the least, lol.
I have no information on it what so ever & would really like to figure a few things out about it, if possible:
¹What particular kind of doll house it? ²How old is it? ³What can be DIY/hand-made instead of buying expensive pre-made kits, like porch railing, banisters ect? ⁴Is it possible to add a balcony to the 2nd or 3rd floor? ⁵Is it possible to modify an existing window into a doorway? ⁶Is it possible to add/remove interior walls to make rooms/areas bigger/smaller? ⁷Can a door be added to an existing interior wall? ⁸Can a 2nd door leading to the porch be added on the side of the house?
I have no clue and figured the best thing to do was ask.
ANY tips & advice on the best way to go about any of this would be greatly appreciated!
My ultimate goal is to completely restore & repair the entire doll house top to bottom.
I've introduced myself in the newcomers forum.
I received my Hurstwood Cottage kit from Bromley yesterday and I've already started on it.
Here's an album of me unpacking it: https//imgur.com/a/1ITiW6m
This is an intro post basically. This is my first dollhouse build so I thought I'd go for a small one and my plan for this also includes doing three different types of exterior finish; brick, panelling and render.
I'm going to turn this into a nice modern home.
It finally occurred to me that I'm on a Greenleaf forum and I have never shared that Greenleaf has one of my favorite and most used products, but I'll get to that last. First a couple of questions.
Is anyone familiar with Greenleaf's vinyl tile flooring? Is it glossy, and if so, can it be dulled? I want a paved stone look throughout the entire first floor of my Creole plantation house. This product:
While I can do the paperclay method, I'm worried that is going to add a great deal of weight to an already very heavy house. It's Lawbre's Rosedawn and it weighs a lot even in its unfinished state.
Added weight brings up my other question. Can anyone recommend a good brick sheet? Something textured, embossed, with the appearance of real brick? I've in the past purchased a few printed sheets of brick from England just to see what they were like and, well, I'd use them on a child's dollhouse maybe but not something on which I'm going for realism. They look good but even when not up close they are very obviously just printed paper.
I've etched brick into joint compound (a lot of work but looks great!). I've done brick and stone out of egg cartons (also looks great!). The joint compound will make this house far too heavy, and there is no way in heck I am cutting thousands of individual bricks out of egg cartons! I am seriously hoping there's some product out there that would work.
Okay, so there are my questions, now allow me to sing Greenleaf's praises for one of their products that is one of my favorites and most used. Their siding:
OMG have I bought bags and bags of this stuff over the years. It's admittedly a bit rough and I probably wouldn't use it to side a gleaming mansion, but it has so many other uses! Here are some that I've used it for.
It's perfect for siding a farmhouse or other "rustic" building. A simple wash gives it a fantastic aged appearance without a ton of work futzing around with multi-layers of painting and sanding and aging techniques. Some awful blurry old pics below of my farmhouse when it was in progress. I don't think they show just how fantastic that siding looked IRL.
Another pic below is a pic of a bedroom in (I think) Salem, MA. See that ceiling and that planked wall behind the bed? I used Greenleaf siding to recreate that and I was totally thrilled with the result. I also used Greenleaf's shingles on that same Colonial. The front was clapboard but I shingled the sides. I needed smaller shingles because historically those were pretty narrow. I simply snapped 'em in half, no scoring required.
The first floor of my Creole is going to be pretty "raw", with exposed brick exterior walls, but the interior walls of the first floor will be exposed planks behind stud framing. I'll be using even more Greenleaf siding for that. It's 3/4" wide so I'm going to score it at 1/2". The half-inch planks will be for the wall framing, the remaining 1/4" will be the equivalent of 3" lathing for the attic ceilings. And, of course, loads of it to plank almost all of the ceilings!
So there are a few of my handy-dandy uses. And at $5.00 for 360 square inches, I challenge anyone to find a better deal! If you could even find something that works half as well. Do you have other-than-intended uses for the siding or other products?
Edit: And oh yeah, it worked fabulously well for horizontal planked wainscoting in that Colonial house. I was going for a very early Colonial look so I didn't want any fine mouldings. That siding did the trick!
I finally got it! I'm building my first house, the Orchid. I literally sat and stressed for hours yesterday about the stairs, which were horrible and splintery and way too big really for the housel. So I found angieaug's video on youtube and the lightbulb went on. I cobbled together a set this morning that fits like I want and she made it easy as pie. Eating pie that is, lol. So thanks to her! They are drying but I need to figure out wallpaper and stuff before I put them in permanently.