Jump to content
Denisem

Ageing wood

Recommended Posts

When painting to age wood ,I seen some saying about a dirty wash ,can anyone enlighten me ,I’m a newly ,thanks

Share this post


Link to post
Share on other sites

A mixture of India ink and isopropyl (rubbing) alcohol will give that pretty silvery aging effect.

Share this post


Link to post
Share on other sites

I have had some luck with some of the gray stains.  I would recommend testing them first as some look really good and others not so much.

Share this post


Link to post
Share on other sites

Another option is to age the wood with tea, steel wool and vinegar.  Gives the wood a silvery finish. Put a wad of steel wool in a jar of vinegar, let the wool degrade overnight. Put a few tea bags in hot water. Cool. Paint or soak the wood in the tea. Let dry. Brush the wood with the vinegar solution. 

Share this post


Link to post
Share on other sites

Or use chalk pastels in Mod Podge....or paint.  Basically brush it on, wipe it off.  You use a craft knife to scrape the chalk into the liquid medium until you achieve the colour you want.  Works exceptionally well - I often use this technique.

Share this post


Link to post
Share on other sites

I agree with Holly, India ink and alcohol. I have used it for years on my railroad models, and it does give a very silvery, aged finish. I usually use 1 teaspoon per bottle of isopropyl alcohol, but also 2 teaspoons for a darker look. I've tried three teaspoons, but it was too dark for my tastes. For very aged wood, scrape it first with a fine-toothed razor saw or 80 grit sandpaper for some heavy graining. The alcohol mix soaks into the grooves for a very realistic aged look. If you want knots in your wood, drill a small hole and carve some curvy lines around it. Looks very realistic after the alcohol wash. For a caboose with knotty pine siding, I drilled the holes at angle, glued toothpicks in the holes, sanded them flush with the siding, carved the curves, finally the India ink wash. Turned out great. I did this in 1:20.3 scale, so it should work very well in 1:12. 

John

  • Like 2

Share this post


Link to post
Share on other sites

I use a CLEAN empty yogurt container and use about a half cup of alcohol and add my ink by the drop. applying it to a test piece of the wood I'm trying to age (it dries quickly) until I get the color I want.  The steel wool & vinegar gives a different color effect, also old & weathered.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...