Jump to content

Winchester


jrchob
 Share

Recommended Posts

Decided to start a new topic on house since house is here. Will decide on a new name later on. Need to get a real feel for the house. Fortunately the house came with a nice spiral booklet with instructions. Will try to take it step by step and not get so overwhelmed. There are so many parts and pieces where the names are not familiar to me. It helps to daily read the booklet.

Made an important purchase this morning- a wide sturdy stepstool to reach the upper parts of the house!!

  • Like 5
Link to comment
Share on other sites

Oh this is gonna be such fun to watch! :clap:  That step stool will come in handy!  I have a really tall house (Jarrell Manor) that I think I may just put on a low coffee table when it comes time to do the shingles! :p

  • Like 1
Link to comment
Share on other sites

So is this a kit of the Winchester house or a kit you're going to turn into the Winchester house?  I'm assuming by the name that it is THE Winchester house??  This is going to be a huge project!  Will be following along for sure!

  • Like 1
Link to comment
Share on other sites

3 hours ago, Shareb said:

So is this a kit of the Winchester house or a kit you're going to turn into the Winchester house?  I'm assuming by the name that it is THE Winchester house??  This is going to be a huge project!  Will be following along for sure!

Thanks Rebecca! It is the Winchester from Lawbre. I was able to purchase it with some money my Dad left me. I have started an album.

  • Like 1
Link to comment
Share on other sites

Finished sorting, priming  name labeling,exterior components. Since I am incorporating several fireplaces, I needed a chimney. It arrived today. It is a solid piece faced with miniature bricks. The maker used to be a mason. Can't do much today as my eyes were dilated earlier.

Parts.jpg

chimney.jpg

  • Like 2
Link to comment
Share on other sites

Finished putting on 1st side of foundation. Have always painted foundations so this is a first. Thinking of a grey-brown but haven't decided. Also decided on what the rooms will be. With 13 rooms not much is left out!! (except a bathroom. I dislike doing those)

foundation.jpg

Link to comment
Share on other sites

28 minutes ago, Cathy C said:

I found these photos awhile back.  They painted the foundation gray, then used watered down acrylics to achieve the gray-brown finish.

Thanks! That's a beautiful finish. Same lannon stone I believe.

Link to comment
Share on other sites

  • 2 weeks later...

Have been shingling. I think it is easier to do sitting down! My arms get pretty tired. When my arms get tired I am painting the exterior window and some mouldings. I have changed the color scheme. How much I do with the accent color will probably depend on the steadiness of my hands.5c4b2e0b433b0_Newcolorscheme.jpg.ad9f957

Link to comment
Share on other sites

I know what you mean about the unsteady hands and accent colors..... I often have lofty ideas, but once I start the fine painting I realize that I just cannot hold my hand steady enough to do the fine detail anymore.....so I tell myself "Keep it simple!"   ;)

 

  • Like 1
Link to comment
Share on other sites

Looks great! I get impatient and if I slop a bit over, I use a wet brush to wipe away excess sloppage. Then when dry, if needed, touch up with whatever colour needs touching up. For me, it is a matter of gradually neatening things up with various layers of paint until I get a neat enough edge to be reasonably happy. 

  • Like 3
Link to comment
Share on other sites

I spend more time applying painters tape around smaller detailed surfaces than I do painting them but the time spent is worth it to keep everything neat. However, with your house that would be an entire roll of tape and more patience than I would have. Beautiful house.

  • Like 3
Link to comment
Share on other sites

I have just decided all the cords in the windows are broken!! Since I can"t hire a window person, they have just become non working windows.I attempted to begin to paint one this morning by first removing the bottom panes.I ended up with the window in many pieces. So...

thumbnail?appId=YMailNorrinLaunch

How's this for detail!!

 

 

 

Link to comment
Share on other sites

1 hour ago, jrchob said:

I have just decided all the cords in the windows are broken!! Since I can"t hire a window person, they have just become non working windows.I attempted to begin to paint one this morning by first removing the bottom panes.I ended up with the window in many pieces. So...

thumbnail?appId=YMailNorrinLaunch

How's this for detail!!

The image doesn't show up, but I can imagine your frustration. I like the way you solved the non-opening window issue. Where's a reliable handyman when you need one?   :dunno:

Link to comment
Share on other sites

33 minutes ago, KathieB said:

The image doesn't show up, but I can imagine your frustration. I like the way you solved the non-opening window issue. Where's a reliable handyman when you need one?   :dunno:

Sorry about that!window.jpg.b131e7544bd1ccff4f7ba6b392562

Link to comment
Share on other sites

Gotta do what you gotta do, right? Problem solved! 

In my Lawbre, the windows are glass, so after spending way too much time fretting about how to paint them, attempting to tape them, I gave into the advice from someone, maybe Teri at Lawbre, and just painted, not worrying about the glass. It scrapes off very handily with a razor blade! 

As for the 'working windows', I've had that challenge before, with my Thornhill, and me and working windows don't get along. The value vs the effort sort of thing. 

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...