Jump to content

1:16 scale furniture in 1:12 scale house?


Recommended Posts

Hello there,

I am new to the mini community but have been an admirer for years.   I am giving my daughter a house full of furniture for Christmas this year and in the last two days have learned a lot of things about scale that I had no idea existed.   My problem is that I fell in love with some 1:16 scale furniture and ordered it not knowing that the home kits are specific sizes.   I LOVE the 1:12 scale homes more than the 1:16 scale home and am wondering if the 1:16 scale furniture will look terrible in a 1:12 scale home?   I plan on using all 1:16 scale furniture and dolls. 

Do any of you have both a 1:12 scale home and 1:16 scale furniture that you could show me a picture of the size difference.  I've searched everywhere online and have only been able to find pictures of the furniture compared to each other but not a 1:12 scale home with all 1:16 scale furniture inside.  

Thank you so much!   I'm sure as I get building, I will have a million more questions as well. 

Link to post
Share on other sites

Hi, Denise, I hope you'll post an introduction in the Newcomers' Forum so you can tell us how you get attracted to our mini mania hobby.  1:16 furniture in a 1:12 house is sort of like putting regular 1:1 furniture into a high-ceilinged, large-roomed Victorian mansion or a palace.  Where did you find 1:16 dolls?

Link to post
Share on other sites

Hi, Denise.

Even among 1:12 house kits, room size and ceiling heights vary considerably. I'm thinking that since 1:16 furniture is smaller than 1:12, it may work well in a smaller 1:12 house.  Off the top of my head, I don't recall anyone here using that combination. Perhaps someone who has a Lundby (1:16) house might photograph some of the furniture in a 1:12 house so you can see for yourself.

1 hour ago, havanaholly said:

Where did you find 1:16 dolls? Holly, Lundby houses are 1:16. Dolls are available on the Lundby website. Found some on Ebay as well.

 

Link to post
Share on other sites

I have some Lundby and Tomy furnishings and some dolls that measure 3 3/4 inches tall.  When standing a 3 3/4" doll next to some of my 1:12 scale doors, the dolls head is not much above the 1:12 scale doorknob.  I will try to post a picture of Lundby dining table and chairs in a 12" wide (1:12 scale dining room).

 

ScaleLundbyComparison.jpg

Link to post
Share on other sites
1 hour ago, thriftymini said:

If you are building the house, you would be able to make changes that will work better with the 1:16 scale.  Something like just lowering the doorknobs.

...and shortening the doorways and doors...

Link to post
Share on other sites

I used 1:16 furniture in a 1:12 house for my 3 year old. It was fine for children to play with. It made the rooms seem rather spacious. THe windows will be high and the doors large. The stairs were large, but hey no one minded.

 

 

Link to post
Share on other sites
21 hours ago, thriftymini said:

I have some Lundby and Tomy furnishings and some dolls that measure 3 3/4 inches tall.  When standing a 3 3/4" doll next to some of my 1:12 scale doors, the dolls head is not much above the 1:12 scale doorknob.  I will try to post a picture of Lundby dining table and chairs in a 12" wide (1:12 scale dining room).

 

ScaleLundbyComparison.jpg

I looooooOOOooooOOOoove the look of your house.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By JeannieS
      Hi, Everyone!  I am new to the Greenleaf Forum.  I live in Fairfield County, CT.  I have loved tiny things since I was a child and from about age 9 into my teens I loved decorating my childhood dollhouse (a four-room tin house with an "addition" of 8 rooms thanks to two liquor store boxes, haha) and making mini things for it.  I really didn't pack the house away until I went to college, but then for about ten years I didn't think much about miniatures.  Then I found a dollhouse kit at Goodwill and put that together and decorated it sort of on a whim.  Ten MORE years went by, and my mom sent me a little quarantine birthday care package that contained a miniature room kit, which I finished putting together a few weeks ago.  I started poking around on Instagram looking at some of the amazing things miniaturists do, and now I am wondering why I haven't been making miniatures and building things this whole time!  I think I didn't realize what a large community of people it is.  It sort of felt like something I enjoyed as a kid and almost didn't realize could be a hobby for me as a "grown-up", too.  So here I am!  I just bought an Aster Cottage kit, and am slowly getting ready to put that together with a Christmas theme, but I'm doing lots of reading and preparing because I want it to look great :-)  
    • By JLP
      Help! I started my first dollhouse and FINALLY got to a finishing point after about a year and a half. There are still a few minor things that need done but it’s finished enough for now (I needed to finish it by Xmas for my daughter). I have made dozens of little 1:24 models in the past and am a little knowledgable in electrical (aircraft electrician over a decade ago) but have since become rusty in the topic. I opted to install 6, small LED lights into the dollhouse, connected by a series of 9v batteries. Since my other smaller models have included similar setups with the LEDs and batteries, I didn’t think this would be an impossible task. I have ordered 9V lights and hardwired them into the house, connecting them in series to 6, 9v battery housing and a switch. It had seemed a bit of overkill to me, since the smaller models often used a single AA battery for often up to 4-5 bright lights. Except, it was very dim (which I don’t mind too much, as it’s more for effect anyway) and lasted maybe 30 minutes before dying. I’m lost now on what to do. I would have to completely cut into the house and moulding to replace the wiring. Thoughts? Did I completely mess this up? Help!! I will try to post pictures of the setup. 
    • By Call Me Crazy
      So, half-scale furniture.  What's out there for purchase is getting limited as manufacturers close down or discontinue production.  What I see for sale is overly ornate, not the style I want, or too niche.  I could be wrong, but I think most of us are building houses, not shops or dentist offices.
      Some of you have the skill to make your own furniture.  I built a passable corner cabinet, but my crafting skills aren't that great and I have very limited tools.
      That brings me to kits.  I've made a few by Cassidy Creations that have come out great, but too often those kits have missing pieces, pieces the wrong size, and confusing/wrong instructions.
      There are some great sellers on Etsy making laser-cut kits.  Those I've made successfully were from RedCottageMiniatures, SDKMiniatures, MelissasMiniWereld, and HalfScaleMiniatures.
      I'm curious to know whose kits have others had success with.  Do you have a favorite designer/seller?  What do you like best about the kits?
       
    • By suse53
      does anyone know where i can get the building instructions for greenleaf No. 9010?  its the 56 piece furniture set i believe. the schematic sheet says dollhouse furniture kit, thats it.  hope someone can tell me where i can find the instruction sheet.
       
      thank you
      sue
    • By scalemodelplanet
       
      I have made working miniature power tools like Power drill, angle grinder, circular saw, air blower...and more with the name of "SAZOH miniature power tools"
      Here are the video links of my working power drill model (Please subscribe my youtube channel for more videos)
      https://www.youtube.com/watch?v=TQumYgobBhY

       


      https://www.youtube.com/watch?v=JCyQfGLsajI
       
×
×
  • Create New...