Jump to content
Sign in to follow this  
Test

Help with Trunk Kit

Recommended Posts

I picked up a dollhouse trunk kit from an estate sale and thought it would be the perfect accessory for my most recent house building project.  However, while all of the pieces/components were there, the kit was missing the critical instructions.  I thought it would be a cinch since, after all, it was only a basic trunk, but when I poured out the contents there seemed to be a few more pieces than what was represented in the only drawing that was included.

First off, just based on the picture (there was no manufacturer information included) can anyone identify this kit?  Secondly, I am pretty since the inside is intended to be papered, that this is a fully functioning, hinged, trunk and that the additional pieces are a part of that mechanism, but I am unsure of how to proceed.  Can anyone advise based on the picture?  I will do my best to describe the pieces:

The kit came with:

  • Wooden pieces to assemble top and bottom of trunk (done)
  • Brass findings for the top and sides of trunk (done)
  • Brass latch for the front of trunk (done)--all placed based on picture

The parts I am uncertain of:

  • 4 brass half circles--I am assuming that these represent the back hinges, but am not sure if they belong visible on the back or on the inside back of the trunk when open
  • 2 small brass medallions (they are cupped as seen in second picture).  Each of the medallions has a small hole on one end
  • 2 small brass wires that came pre-bent--I experimented with these and they pass easily through the hole in the medallions without going all the way through
  • 2 small brass hoops that slightly thin at the joint
  • 1, approx 1.5" brass wire
  • 1 piece yellow satin ribbon

 

Share this post


Link to post
Share on other sites

The ribbon is likely a stopper to stop the trunk lid from flipping completely open and should be placed on the diagonal and under the interior paper like these ones on this picnic basket.. Trunks often only have them on one side.

Image result for miniature trunks 1:12

  • Like 1

Share this post


Link to post
Share on other sites

It looks as though the kit is sold by JustMiniatureScale.  You could try contacting them to see if they could direct you to the manufacturer for instructions.

Share this post


Link to post
Share on other sites

At first I thought the half moons were corner guards but there is no room on your corners for them so I think you are correct, they are probably hinges.

Share this post


Link to post
Share on other sites

Trunk kit #Cats8 made by Cat's Paw

I couldn't find this trunk on their site or much of any trunks.

The trunk kits may have been a limited item? On the Handley House site it says only 4 available.

They seem to specialize in brass parts & findings.

Maybe you could email them? Email: Info@CatsPawOnline.com

 

GetImage.ashx?Path=%7e%2fAssets%2fimages
 

Share this post


Link to post
Share on other sites

Thank you all so much!  That is exactly the kit I have and based on the picture I was able to solve another part of the puzzle--the picture shows the brass medallions on the side of the box.  I have emailed the manufacturer as well as JustMiniatureScale for the instructions. 

You are all so very wonderful :^)

 

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By AlisonJR
      Hello! 

      I'm currently working on my first dollhouse. I bought this already assembled and have noticed there are hinges in the corners of most of the rooms (photos attached) some of which stick out quite  bit. I am wondering if anyone has suggestions for how to hide these as I don't want them to show under my wallpapers. (it seems as if they were used to pull the corners of the dollhouse walls together)

      Thanks!
    • By Test
      Can anyone help identify this house?

    • By Qubanqtee
      Hi everyone - was wondering if in all the experts here someone may know where to find 1:12 scale hardware such as the ones pictured (in gold) I'm having a heck of a time finding them in gold...any suggestions would be welcome (not my picture)

    • By fleabags3
      I bought a lg box of minis and wanted some help identifying these- age etc if possible .  Thank you in advance! 



    • By Samusa
      Hi all, 
      I just picked up the cutest travel trailer kit on eBay. It's called the 1950s style travel trailer kit by Little Habitats. It looks seriously adorable from the black and white instruction booklet but doing a quick google search I've been unable to find out anything about this kit or company. So I'm reaching out to the wealth of knowledge on this site to inform me on what I have  Has anyone built one of these? Do you know if they made other kits? Or other minis? Any info is appreciated.
×
×
  • Create New...