Jump to content

3D Plastic Printed furniture


aussieguy84

Recommended Posts

Hi everyone,

Has anyone ordered any of the 3D plastic furniture from shapeways.com ? Is it any good? Is it to scale? Any recommendations for a dealer on there that you have had a positive experience with?

They are currently have a 20% off sale so I'm considering a few purchases :-) 

Cheers

Scott 

Link to post
Share on other sites

Thanks, Sable!  :D

From the post Sable linked to, I have links to the various pieces and places I have experience with.  The laundry basket is smooth.  All other minis I've received have a slightly rough texture.  This texture must be part of the plastic process or design, not sure which.  You can select different plastics, and many say they are smooth or polished.  That's not always the case, and I'm not sure why.

I try to order pieces where the person has actually printed them and has a photo of the final product not just the digital approximation.  This way you can tell just how grainy it will be.  The grainy texture resists sanding for some reason, but that doesn't mean they are poor pieces.  I would imagine this will all improve as the technology improves.  You can google ways to smooth the plastic, but it involves chemicals and/or heat.  That's been above my paygrade, so I just buy the pieces with minimal grain and do the best I can with them.

As far as dealers, I've not had a bad experience with anyone.  So, the real drawback is the texture which can vary among pieces.  It will depend on what you want the piece to look like in the end.  I hope this helps.

Link to post
Share on other sites

I've purchased from shapeways and got some great minis. Shapeways test prints designs so that it works before they ship it to you. If it doesn't work, they don't ship it. 

To remove the grainy surface, you can sit your item on a heat-proof something (eg bowl or cup) in a saucepan with a little acetone in the bottom. Gently heat. I think you need a lid on it. The fumes from the acetone will slightly melt the surface but I believe you have to watch it so that it doesn't melt too much. I have not tried this, just have it on heresay.

Link to post
Share on other sites

I've ordered 1:24 pieces, and as Brae said, they have a slightly textured surface. This is part of the manufacturing process as 3D printing uses a filament and builds the piece in layers. Some have a smoother finish than others but unless you get a polished finished piece you'll have to deal with the texture. The process Shannon describes is accurate but it is toxic, and on some of the pieces I've gotten, which have some very tiny parts, I'd be concerned with melting too much. Unless you have a clear chamber to observe the piece, it seems like an expensive trial and error process to me. 

I haven't tried sanding any of my pieces, but I have experimented with paints. I spray them with a fixative primer first. I've gotten some very nice pieces and at 1:24 it means some great detail. They are delicate and can break if you drop them so handle with care. :) 

Link to post
Share on other sites

I've ordered from Shapeways several times (always 1:24 stuff). Here are a couple of blog posts about my experiences:

http://www.emilymorganti.com/blog/?p=6422

http://www.emilymorganti.com/blog/?p=6622

Their customer service is good and I haven't had any negative experiences with any dealers. Once something I ordered couldn't be printed on the material I chose and they removed it from the order and shipped the rest. I would have preferred to order the item in a different material and had them all shipped together, but they sent me a coupon for free shipping so I could reorder the other piece in the different material. (I don't remember if they offered me that automatically or I had to ask for it.)

The grainy texture only really bothers me on things that should be smooth and sleek, like a faucet (or anything metal, really). I think it adds to the realism for upholstery. They are fragile and I've had a few pieces break. They can be glued back together with super glue.

 

 

Link to post
Share on other sites

I ordered a good amount of 1:48 scale furniture from prettysmallthings --and it is marvelously detailed and tiny. And the price was pretty good considering how scarce detailed 1:48 stuff is outside of kits (also expensive). I enjoy painting in this scale, so all i do is prime it (fusion paint) as needed and paint. 

I ordered a 1:12 item but it didn't pass the quality control steps (they had trouble printing it), so there was no charge and they emailed me promptly. They display the progress of the order so its all pretty clear. I'm sure I'll order again.

Link to post
Share on other sites

Thanks for your feedback everyone! There are some great detailed pieces on there and so many to choose from. 

I've taken the plunge and placed and order! A washer/dryer, laundry basket, 2 chairs and a wall phone (skeptical of the scale with the phone but we'll see). Looking forward to my delivery later in the month - Then I'll deal with the texture!!! 

Cheers

Scott 

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Call Me Crazy
      So, half-scale furniture.  What's out there for purchase is getting limited as manufacturers close down or discontinue production.  What I see for sale is overly ornate, not the style I want, or too niche.  I could be wrong, but I think most of us are building houses, not shops or dentist offices.
      Some of you have the skill to make your own furniture.  I built a passable corner cabinet, but my crafting skills aren't that great and I have very limited tools.
      That brings me to kits.  I've made a few by Cassidy Creations that have come out great, but too often those kits have missing pieces, pieces the wrong size, and confusing/wrong instructions.
      There are some great sellers on Etsy making laser-cut kits.  Those I've made successfully were from RedCottageMiniatures, SDKMiniatures, MelissasMiniWereld, and HalfScaleMiniatures.
      I'm curious to know whose kits have others had success with.  Do you have a favorite designer/seller?  What do you like best about the kits?
       
    • By suse53
      does anyone know where i can get the building instructions for greenleaf No. 9010?  its the 56 piece furniture set i believe. the schematic sheet says dollhouse furniture kit, thats it.  hope someone can tell me where i can find the instruction sheet.
       
      thank you
      sue
    • By scalemodelplanet
       
      I have made working miniature power tools like Power drill, angle grinder, circular saw, air blower...and more with the name of "SAZOH miniature power tools"
      Here are the video links of my working power drill model (Please subscribe my youtube channel for more videos)
      https://www.youtube.com/watch?v=TQumYgobBhY

       


      https://www.youtube.com/watch?v=JCyQfGLsajI
       
    • By mininewbie
      Hello there,
      I am new to the mini community but have been an admirer for years.   I am giving my daughter a house full of furniture for Christmas this year and in the last two days have learned a lot of things about scale that I had no idea existed.   My problem is that I fell in love with some 1:16 scale furniture and ordered it not knowing that the home kits are specific sizes.   I LOVE the 1:12 scale homes more than the 1:16 scale home and am wondering if the 1:16 scale furniture will look terrible in a 1:12 scale home?   I plan on using all 1:16 scale furniture and dolls. 
      Do any of you have both a 1:12 scale home and 1:16 scale furniture that you could show me a picture of the size difference.  I've searched everywhere online and have only been able to find pictures of the furniture compared to each other but not a 1:12 scale home with all 1:16 scale furniture inside.  
      Thank you so much!   I'm sure as I get building, I will have a million more questions as well. 
    • By QuirkyNerdyCool
      Hi All!
      I’m a newbie when it comes to finishing miniature furniture. I have a lovely unfinished chair that has some carved detail and I’d like to repaint it gold, bronze, or dark brown and reupholster it. Can anyone recommend a brand and color of gold paint? In general, what are your favorite paint types and brands to use when painting miniature furniture? Do you prime the wood before painting? If so, what do you use. 
      Thanks in advance for your help!
      Sylvia
       
×
×
  • Create New...