Jump to content
  • entries
    42
  • comments
    35
  • views
    38,379

A Warm Fireplace


Minis On The Edge

1,340 views

To make a glowing fireplace, you will need the following:

Fireplace

Hot Glue Gun

Glue Gun Sticks

Coffee Grinds

1 tree twig (dried and brown)

1 light bulb (Painted orange or red)

1. Take your twig and cut three (3) 1" parts

blog-4-1151461958.jpg

blog-4-1151461997.jpg

2. Plug in your hot glue gun

3.Take your fireplace and drill a small hole in the back of the fire place center so that you can feed your

lightbulb wire through it.

4. Take your light bulb and if it is a clear bulb, paint it red or orange and set it aside to dry

5. Once the bulb dries, feed it into the hole you drilled in the fireplace

6. Take your hotglue gun and add a small drop under the light bulb and press it down so that it will dry in

place.

7. Add some glue under one of the twigs (that will be a log) and put it on top of the light bulb.

8. Add a dime sized amount of glue to that log and add your second log on top of that

blog-4-1151462019.jpg

9. Add glue on the third log and sprinkle dried coffee grinds on top

blog-4-1151461940.jpg

blog-4-1151462035.jpg

10. Plug in your light and enjoy the warm glow. If you like you can dry brush black paint on the corner of the logs to give it the "burnt" look. You can also go over the coffee grinds with black paint.

blog-4-1151462122.jpg

6 Comments


Recommended Comments

I messed up on mine and forgot to glue the bulb down :p so it ended up in the back which is why there is more light behind the fire place and not light coming from below. It still look okay but I did want you to know I did this one wrong ;)

Link to comment

OH TRACY!!! Thank you for this tutorial!!! I've been trying to figure out how to do 4 inexpensive 1/2 scale fireplaces...and this is exactly what I'm going to do!!! :)

Link to comment
Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...